What it does ¶
The ROS interface provides a bridge between NAOqi and ROS . For further details about ROS , see: http://wiki.ros.org .
It runs on a desktop and is able to communicate with all the Aldebaran robots.
How it works ¶
ROS interface is a program running both as a ROS node and a NAOqi module.
It listens to NAOqi messages and publishes the translated ROS messages. Similarly, some services are interfaced between the two middle-ware to perform robotic actions.
Once launched, to allow basic visualization and interaction with the robot, you can use the common ROS tools like:
ROS interface uses the URDF and meshes provided by ALdebaran to render data.
ROS Indigo or higher.
How to use ¶
ROS interface is released via ROS repositories.
Necessary information on how to install and use is provided by the community on Aldebaran ROS wiki page: http://wiki.ros.org/Aldebaran .
The code is pure open source: it is under the Apache 2.0 license with shared maintainership with the community.
If you need any support, contact the ROS community.