Locomotion control Tutorial: The Robot Position¶

NAOqi Motion - Overview | API | robot position Tutorial

Introduction ¶

This tutorial explains how to use the robotPosition and getFootSteps API. Both these API will help you to have a better control on the walk algorithm.

Note

The tutorial is written in Python.

If the matplotlib module is found, it will be used for plotting data: http://matplotlib.sourceforge.net/.

For python-related troubleshooting, see: Python SDK Install Guide.

Code review ¶

In this section we describe each important piece of code of the example.

NAOqi tools ¶

First, we import some external modules:
• config: custom module with helper functions
• motion: constant definitions such as SPACE.
• math: the standard python mathematic library useful for cos, sinus ...
• almath: an optimized mathematic toolbox for robotics. For further details, see: libalmath API reference.
• pylab: matplotlib useful for plotting data (http://matplotlib.sourceforge.net/).

# -*- encoding: UTF-8 -*-

import argparse
import time
import math
import almath
from naoqi import ALProxy

try:
import pylab as pyl
PLOT_ALLOW = True
except ImportError:
PLOT_ALLOW = False

def main(robotIP, PORT=9559):
""" robot Position: Small example to know how to deal
with robotPosition and getFootSteps
"""

motionProxy  = ALProxy("ALMotion", robotIP, PORT)
postureProxy = ALProxy("ALRobotPosture", robotIP, PORT)

# Wake up robot
motionProxy.wakeUp()

# Send robot to Stand Init
postureProxy.goToPosture("StandInit", 0.5)

# Initialize the move
motionProxy.moveInit()

# end init, begin experiment

# First call of move API
# with post prefix to not be bloquing here.
motionProxy.post.moveTo(0.3, 0.0, 0.5)

# wait that the move process start running
time.sleep(0.1)

# get robotPosition and nextRobotPosition
useSensors = False
robotPosition     = almath.Pose2D(motionProxy.getRobotPosition(useSensors))
nextRobotPosition = almath.Pose2D(motionProxy.getNextRobotPosition())

# get the first foot steps vector
# (footPosition, unChangeable and changeable steps)

footSteps1 = []
try:
footSteps1 = motionProxy.getFootSteps()
except Exception, errorMsg:
print str(errorMsg)
PLOT_ALLOW = False

# Second call of move API
motionProxy.post.moveTo(0.3, 0.0, -0.5)

# get the second foot steps vector
footSteps2 = []
try:
footSteps2 = motionProxy.getFootSteps()
except Exception, errorMsg:
print str(errorMsg)
PLOT_ALLOW = False

# end experiment, begin compute

# here we wait until the move process is over
motionProxy.waitUntilMoveIsFinished()
# then we get the final robot position
robotPositionFinal = almath.Pose2D(motionProxy.getRobotPosition(False))

# compute robot Move with the second call of move API
# so between nextRobotPosition and robotPositionFinal
robotMove = almath.pose2DInverse(nextRobotPosition)*robotPositionFinal
print "Robot Move:", robotMove

# Go to rest position
motionProxy.rest()

# end compute, begin plot

if PLOT_ALLOW:
#################
# Plot the data #
#################
pyl.figure()
printRobotPosition(robotPosition, 'black')
printRobotPosition(nextRobotPosition, 'blue')
printFootSteps(footSteps1, 'green', 'red')

pyl.figure()
printRobotPosition(robotPosition, 'black')
printRobotPosition(nextRobotPosition, 'blue')
printFootSteps(footSteps2, 'blue', 'orange')

pyl.show()

# end plot

def printRobotPosition(pos, color):
""" Function for plotting a robot position
:param pos: an almath Pose2D
:param color: the color of the robot
"""

robotWidth = 0.01
pyl.plot(pos.x, pos.y, color=color, marker='o', markersize=10)
pyl.plot([pos.x, pos.x + robotWidth*math.cos(pos.theta)],
[pos.y, pos.y + robotWidth*math.sin(pos.theta)],
color=color,
linewidth = 4)

def printFootSteps(footSteps, colorLeft, colorRight):
""" Function for plotting the result of a getFootSteps
:param footSteps: the result of a getFootSteps API call
:param colorLeft: the color for left foot steps
:param colorRight: the color for right foot steps
"""

if len(footSteps[0]) == 2:
posLeft  = footSteps[0][0]
posRight = footSteps[0][1]

if posLeft != posRight:
leftPose2D = almath.Pose2D(posLeft[0], posLeft[1], posLeft[2])
printLeftFootStep(leftPose2D, colorLeft, 3)
rightPose2D = almath.Pose2D(posRight[0], posRight[1], posRight[2])
printRightFootStep(rightPose2D, colorRight, 3)

if len(footSteps[1]) >= 1:
for i in range(len(footSteps[1])):
name = footSteps[1][i][0]
pos = footSteps[1][i][2]
tmpPose2D = almath.Pose2D(pos[0], pos[1], pos[2])

if name == 'LLeg':
leftPose2D = rightPose2D * tmpPose2D
printLeftFootStep(leftPose2D, colorLeft, 3)
else:
rightPose2D = leftPose2D * tmpPose2D
printRightFootStep(rightPose2D, colorRight, 3)

if len(footSteps[2]) >= 1:
for i in range(len(footSteps[2])):
name = footSteps[2][i][0]
pos = footSteps[2][i][2]
tmpPose2D = almath.Pose2D(pos[0], pos[1], pos[2])

if name == 'LLeg':
leftPose2D = rightPose2D * tmpPose2D
printLeftFootStep(leftPose2D, colorLeft, 1)
else:
rightPose2D = leftPose2D * tmpPose2D
printRightFootStep(rightPose2D, colorRight, 1)

pyl.axis('equal')

def printLeftFootStep(footPose, color, size):
""" Function for plotting a LEFT foot step
:param footPose: an almath Pose2D
:param color: the color for the foot step
:param size: the size of the line
"""

lFootBoxFL = footPose * almath.Pose2D( 0.110,  0.050, 0.0)
lFootBoxFR = footPose * almath.Pose2D( 0.110, -0.038, 0.0)
lFootBoxRR = footPose * almath.Pose2D(-0.047, -0.038, 0.0)
lFootBoxRL = footPose * almath.Pose2D(-0.047,  0.050, 0.0)

pyl.plot(footPose.x, footPose.y, color=color, marker='o', markersize=size*2)
pyl.plot( [lFootBoxFL.x, lFootBoxFR.x, lFootBoxRR.x, lFootBoxRL.x, lFootBoxFL.x],
[lFootBoxFL.y, lFootBoxFR.y, lFootBoxRR.y, lFootBoxRL.y, lFootBoxFL.y],
color = color,
linewidth = size)

def printRightFootStep(footPose, color, size):
""" Function for plotting a RIGHT foot step
:param footPose: an almath Pose2D
:param color: the color for the foot step
:param size: the size of the line
"""

rFootBoxFL = footPose * almath.Pose2D( 0.110,  0.038, 0.0)
rFootBoxFR = footPose * almath.Pose2D( 0.110, -0.050, 0.0)
rFootBoxRR = footPose * almath.Pose2D(-0.047, -0.050, 0.0)
rFootBoxRL = footPose * almath.Pose2D(-0.047,  0.038, 0.0)

pyl.plot(footPose.x, footPose.y, color=color, marker='o', markersize=size*2)
pyl.plot( [rFootBoxFL.x, rFootBoxFR.x, rFootBoxRR.x, rFootBoxRL.x, rFootBoxFL.x],
[rFootBoxFL.y, rFootBoxFR.y, rFootBoxRR.y, rFootBoxRL.y, rFootBoxFL.y],
color = color,
linewidth = size)

if __name__ == "__main__":
parser = argparse.ArgumentParser()
help="Robot port number")

args = parser.parse_args()
main(args.ip, args.port)



Initialization of the robot ¶

Then, the proxy to ALMotion module is created. This proxy is needed to call the ALMotion API. Set stiffness into the joint and execute a PoseInit.


def main(robotIP, PORT=9559):
""" robot Position: Small example to know how to deal
with robotPosition and getFootSteps
"""

motionProxy  = ALProxy("ALMotion", robotIP, PORT)
postureProxy = ALProxy("ALRobotPosture", robotIP, PORT)

# Wake up robot
motionProxy.wakeUp()

# Send robot to Stand Init
postureProxy.goToPosture("StandInit", 0.5)

# Initialize the move
motionProxy.moveInit()



The experiment ¶

We send a first walk command and, few seconds later, a second one.

We can see the difference between unchangeable and changeable foot steps. The second walk command is executed after the unchangeable foot generated by the first walk command.


# First call of move API
# with post prefix to not be bloquing here.
motionProxy.post.moveTo(0.3, 0.0, 0.5)

# wait that the move process start running
time.sleep(0.1)

# get robotPosition and nextRobotPosition
useSensors = False
robotPosition     = almath.Pose2D(motionProxy.getRobotPosition(useSensors))
nextRobotPosition = almath.Pose2D(motionProxy.getNextRobotPosition())

# get the first foot steps vector
# (footPosition, unChangeable and changeable steps)

footSteps1 = []
try:
footSteps1 = motionProxy.getFootSteps()
except Exception, errorMsg:
print str(errorMsg)
PLOT_ALLOW = False

# Second call of move API
motionProxy.post.moveTo(0.3, 0.0, -0.5)

# get the second foot steps vector
footSteps2 = []
try:
footSteps2 = motionProxy.getFootSteps()
except Exception, errorMsg:
print str(errorMsg)
PLOT_ALLOW = False



Compute robot move ¶

Here, using walk API, we compute the move made by the robot. The goal is to find the value of the second walk command.

The robot begins the second walk command after the first command unchangeable foot step. In this case the robot position is the result of nextRobotPosition.

Then, we wait the end of the walk process (waitUntilMoveIsFinished) and we get the final robot position.

The distance is equivalent to:

.

And the result should be [0.3, 0.0, -0.5]


# here we wait until the move process is over
motionProxy.waitUntilMoveIsFinished()
# then we get the final robot position
robotPositionFinal = almath.Pose2D(motionProxy.getRobotPosition(False))

# compute robot Move with the second call of move API
# so between nextRobotPosition and robotPositionFinal
robotMove = almath.pose2DInverse(nextRobotPosition)*robotPositionFinal
print "Robot Move:", robotMove

# Go to rest position
motionProxy.rest()